ABS Car Spoiler Kettle Extrusion Blow Molding Machine

1.Specifications for ABS Car Spoilers Kettles Extrusion Blow Moulding Machine :1).blow molding machine experience of engineer for more than 12 years2).Machine produce the max for 30L jerrycan3).The capacity is about 60pcs/h.4).The famous imported components for machine5).Taiwan Yuken hydraulic valve for

Featured Products

1.Specifications for ABS Car Spoilers Kettles Extrusion Blow Moulding Machine :
1).blow molding machine experience of engineer for more than 12 years
2).Machine produce the max for 30L jerrycan
3).The capacity is about 60pcs/h.
4).The famous imported components for machine
5).Taiwan Yuken hydraulic valve for stable working
6).The deflashing system can be equiped according to customer's request.

2.Main characteristics of ABS Car Spoilers Kettles Extrusion Blow Moulding Machine:
1).Accumulator head, single layer, the capacity is up to 30L jerrycan, drum.
2).It process the material as HDPE, PP, ABS and etc.
3).Power supply: 380VAC, 50Hz  (depending on client's county ).
4).The machine is mainly composed of extrusion system, die head system,clamping system,hydraulic system and electrical systems:

This ABS Car Spoilers Kettles Extrusion Blow Moulding Machine is mainly used to produce car spoilers ,chemical drum and oil drum. Some basic parameters are as follows:
1.Screw diameter: 100mm
2.L/D ratio: 24/1
3.Max capacity: 120L
Dry cycle: 180pc/h
Clamping force: 230KN
Platen open stroke: 400-900mm
plasten size: 900*780mm
Max platen size: 900*780mm
Oil Pump Power: 11kw
Extrusion motor: 30KW
Plasticizing capacity: 100kg/h
Heating zone: 4 zones
Extrusion heating power: 20.2kw
Power of Die heating: 15.2kw
Max die pin diameter: 250mm
Accumulator head capacity: 5L

The brief introduction for this ABS Car Spoilers Kettles Extrusion Blow Moulding Machine:
Extrusion system:screw: specially designed based on material's trait, High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2.Barrel:
Die head system:Accumulator die head, single cylinder, central injection, vertical fist in first out design, accumulator channel slick
Clamping system:fixed clamping system, double diagonal tie bar single cylinder central clamping, wider space for the mould, install and dismantle the mould easily, linear roll guide rail.
Hydraulic system:adopted proportional pressure controlling, with hydraulic valve and pump of Taiwan Yuken, balanced and accurate action, prolonged useful life, sensitive response.

3.Advantages of this ABS Car Spoilers Kettles Extrusion Blow Moulding Machine :
1).Adopt energy-saving system which can increase the 20% efficiency.
2).The capacity is about 95pcs/h which is15% higher than some others.
3).Power consumption is about 15% lower.
4).All process are well computerized which makes the operation more conenient.
5).Imported hydraulic components which gurantee the stable working for long time.

5.After-sale service:
1). Instruction for Installation and Debugging
Before delivery, FORSTEC takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
FORSTEC also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of FORSTEC, provides the engineer with round-trip tickets, accommodation, vehicle and $55 per day salary.
2). User Training
Before delivery,FORSTEC will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3). Warranty Period
The warranty period for FORSTEC machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement. 

6.Main parameters for this ABS Car Spoilers Kettles Extrusion Blow Moulding Machine:


1Screw diameter80mm

2L/D ratio24:1

3Screw speed50-90r.p.m.

4Drive motorAC 30Kw   3 Phase asynchronism motor

5Inverter driveAmerica Amerson

6Heating zone with cooling fan4 zones

7Output/Throughout100(HDPE  particle)

8Heating capacity20.2KW

9Vertical adjustment of head400mm

10Forward/Backward adjustment of head400mm

11Groove feed barrel cylinderNo

12Gear boxHard gear decelerator

13Ladder and safety railsfixed

1Accumulator capacity5L(3.75kgHDPE)

2DesignFirst in, first out

3Heating zone4 zones

4Heating capacity15.2kw

5Max die$pin diameter250mm

6Die head axis with pre-blow80mm

7Accumulator push-out stroke measurementTransducer  Italy Gefran

8Injection pressure12Mpa

9Extruder stopHAVE

1Tie barTwo tie bar

2Platen size780(W)X900(H)

3Length of mold410-510mm

4Clamping force230KN

5Close/Open stroke400-900mm

6size of mold600×1000mm

7Clamping stroke measurementProximal sensor TAIWAN RIKO

8Hydraulic valveYUKEN

9Number of hydraulic cylinder1

10High pressure14mpa

11Support parts for platen movementGuide

1Drive motorAC 11Kw 3 Phase asynchronism motor

2Hydraulic  valveYUKEN

3Hydraulic pumpTaiwan

4Connector\TuberJapan PIONEER

5SealJapan VALQUA

6Oil tank capacity400L

7Operating pressure14mpa

8Cooling water for oilfixed

9Control of oil level & temperatureChecking oil temperature and abnormal alert
be observed dipstick

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours